Recovery Unit TRS21E-A2L-A3 ATEX 230v & R32 CPS USA

Recovery Unit TRS21E 

The new CPS TRS21E Recovery Unit, is compact more than any other Recovery Unit, thanks to its new design without condenser and extra fan. Similar in design to a Vacuum Pump, this device is just as compact. The robust Construction of the Aluminum and Steel Housing guarantees a long Service Life, even in daily use.

There is only one on/off Switch, so the technician cannot operate it incorrectly! Due to the oil-free double cylinder compressor, very high suction capacities are achieved. Both CFC, HCFC and HFC refrigerants including R410A can be extracted in gaseous and liquid states.

Non-sparking design, so also suitable for R32, R-1234yf, R600a and R290 (A3 refrigerant taking precautionary measures when handling flammable refrigerants).

Characteristics:

• Suitable for all refrigerants of class A1, A2L and A3 (take precautions into account)

• TUV approval for R32 and HFO

• Vapor or liquid recovery, including R-410A

• Extremely compact and easy to transport; only 11 kg heavy!

• 2 cylinder piston compressor; Oil-free

• Filtration: in the suction port

• Permanently lubricated and sealed main bearings Improved piston seal design for less leakage and deeper vacuums

• High pressure cut-off switch with LED display

• Cleanable 100 mesh inlet filter

• Highest recovery rates in its class

• Ignition-safe ON-OFF switch

• Sealed starter relay

The TRS21E is considered the strongest and fastest suction unit in its size and weight class!

Specifications:

• Compressor: Oil-free; 2 Cylinder- Piston Compressor
• Power supply - 220-240V / 50/60Hz
• Surge Protection: 15 amps
• Power Consumption 850W
• Operating temperature ±0 to +49 °C
• Safety pressure switch: 38 bar
• Ergonomic design for easy handling
• Incl. reusable dirt filter
• Hardwired 3m power cord
• Approved for A2L refrigerants including A1, R32, R-1234yf and R-1234ze
• CE and TUV certified and tested and approved for use with A3 refrigerants. (A3 refrigerant taking precautions when handling flammable refrigerants)
• Fastest ARI extraction rates in its class, (best speed-to-weight ratio in the industry)
• Dimensions 300 x 150 x 230mm
• Weight 11kg

Recovery Rates: 
Refrigerant R410a
Direct Vapor: 0,319 kg/min (0,703 lb /min)
Direct Liquid: 5,42 kg/min (11,95 lb/min)
Push-Pull-Liquid: 14,38 kg/min (31,7 lb/min)
High Temp Vapor Rate: 0,37 kg/min (0,816 lb/min )

Refrigerant R22
Direct Vapor: 0,271 kg/min (0,597 lb/min)
Direct Liquid: 4,02 kg/min (8,86 lb/min)
Push-Pull-Liquid: 14,3 kg/min (31,53 lb/min)
High Temp Vapor Rate: 0,39 kg/min (0,86 lb/min)

Refrigerant R134a
Direct Vapor: 0,228 kg/min (0,503 lb /min)
Direct Liquid: 3,54 kg/min (7,8 lb/min)
Push-Pull-Liquid: 11,64 kg/min (25,66 lb/min)
High Temp Vapor Rate: n / A

Refrigerant R407C
Direct Vapor: 0,243 kg /min (0,536 lb /min)
Direct Liquid: 4,31 kg/min (9,50 lb/min)
Push-Pull-Liquid: 13,22 kg/min (29,14 lb/min)
High Temp Vapor Rate: n / A

View the technical datasheet here

Learn more here