VETO PROPAC USA Tech-LC Large Tech Tool Bag 

The Tech LC has been designed for the technicians tools and working environment. Incorporating 53 pockets (50 interior 3 exterior) for hand tools, parts, meters, re-fridge & cordless tools, heavy-duty fastenings and zips, waterproof Polypropylene base, double stitched, heavy-duty plastic coil zips with oversized zip tabs, marine grade zinc studs, powder coated steel D- Rings and industrial strength double nylon stitching.

PRODUCT SPECIFICATIONS:

• Height: 13.5 (34cm)
• Width: 13.5 (34cm)
• Depth: 9.5 (24cm)
• Weight (empty):  6 lbs. (3kg)
• Max Payload: 35lbs (16kg)
• Internal Volume: 1080in3 (18L)

MAXIMISED TOOL STORAGE CAPACITY:

• Vertical Tool Pockets: 50 inside & 3 outside
• Flat Zippered Pockets: 4 inside & 2 outside
• Neoprene Pockets: 2
• D-Rings: 4 large and 5 small
• Exterior Electrical Tape Loop: 8 Fabric with Clip Closure
• Stainless Steel Tape Clip

RUGGED MATERIALS & CONSTRUCTION:

• Waterproof Base: 3mm Injection Molded Polypropylene
• Waterproof Body Fabric: 1800 PVC Impregnated Denier Nylon
• Waterproof Tool Pocket Fabric: 1800 PVC Impregnated Denier Nylon
• Handle: Injection Molded Nylon Plastic w/ over-molded rubber grip
• Zippers: Double Stitched, Heavy Duty Plastic Coil Zippers with Oversized Zipper Tabs
• Fold-Back Snaps: 6 zinc, marine grade
• D-Rings: Powder Coated Steel
• Rivets: 38 zinc, marine grade rivets
• Stitching: Industrial Strength Double Nylon Stitching

OTHER FEATURES:

• Shoulder Strap: Heavy Duty, Non-Slip Padded Shoulder Strap with Clip-On connection
• Warranty: 5 Years (see Veto warranty terms and conditions).

VETO PRO PAC - TOOL BAGS PRODUCT CARE & MAINTENANCE

Keep your zippers clean and properly lubricated

Over time, dirt and grime will clog your zipper coils, preventing them from staying closed. To prevent this from happening, clean and lubricate your zippers twice a year (more often if you work on a dusty construction site).

To clean the coils: Scrub them with soapy water, using a toothbrush. After scrubbing the coils, blow them with air to remove any other fine hairs that were not removed with the brush. To lubricate the coils: Apply a silicone spray, beeswax, or zipper lubricant.

Protect zippers from sharp objects and excessive heat

Any sharp object or heat source can permanently damage zippers. Once a zipper coil is cut or snapped, the zipper will not work and in most cases cannot be repaired.

Most of the cut zipper coils we see are the result of sharp tools being stored inside the bag with the sharp side facing up. Be sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.

Do not overstuff the bag.

Overloading your tool bag will most likely cause significant stress on the zippers, above and beyond what they were designed for and will eventually cause the zipper(s) to separate.

If you have to strain to close your zipper, your tool bag is probably too full... Remove something, rearrange, or proceed with caution, always keeping in mind that you risk violating the terms of your warranty.