VETO PROPAC USA Tech MCT Blackout Tool bag AX3600 

The TECH MCT BLACKOUT Tool Bag comes with Veto Pro Pac’s NEW V-Swap™ REMOVABLE AND EXCHANGEABLE Tool and Meter Panels. V-Swap™ Laptop/Tablet and Bulk Storage Panels SOLD SEPARATELY (V-Swap™ Tool Panels | Veto Pro Pac: Tool Bags That Work).

The TECH MCT BLACKOUT is a stealth version of the popular TECH MCT featuring Veto Pro Pac’s proprietary V-SWAP™ system. Alternative tablet and bulk storage panels are available separately and can be swapped-out enabling tool, gear or job specific storage solutions. The Blackout version also has vinyl coated mesh and regular pocket storage on both flap openings. (Includes tool & meter panels; alternate V-SWAP™ panels available and sold separately).

PRODUCT SPECIFICATIONS:

• Height (H) : 14” (35.5cm)
• Width (W): 12" (30.5cm)
• Depth: 8.5" (21.5cm)
• Handle Height (HH): 17" (43cm)
• Weight (empty): 7lbs (3kg)
• Internal Volume: 800in3 (13L)
• Max Payload: 35lbs (16kg)

MAXIMIZED TOOL STORAGE CAPACITY:

• V-SWAP™ removable tool pocket panel system
• Includes tool & meter panels; alternate V-SWAP™ panels available and sold separately
• 44 Interior & exterior pockets of varying sizes
• Electric Tape Strap
• Neoprene Pockets for Meters/Testers
• Holds over 50 hand tools
• Waterproof base, 3mm polypropylene
• Extra wide padded shoulder strap
• Articulating/fold-flat handle with over-molded ergonomic grip

OTHER FEATURES:

• Warranty: 5 Years (see Veto warranty terms and conditions)

Additional Information

Weight 6.6 lbs

Dimensions 13 × 14 in

VETO PRO PAC - TOOL BAGS PRODUCT CARE & MAINTENANCE

Keep your zippers clean and properly lubricated

Over time, dirt and grime will clog your zipper coils, preventing them from staying closed. To prevent this from happening, clean and lubricate your zippers twice a year (more often if you work on a dusty construction site).

To clean the coils: Scrub them with soapy water, using a toothbrush. After scrubbing the coils, blow them with air to remove any other fine hairs that were not removed with the brush. To lubricate the coils: Apply a silicone spray, beeswax, or zipper lubricant.

Protect zippers from sharp objects and excessive heat

Any sharp object or heat source can permanently damage zippers. Once a zipper coil is cut or snapped, the zipper will not work and in most cases cannot be repaired.

Most of the cut zipper coils we see are the result of sharp tools being stored inside the bag with the sharp side facing up. Be sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.

Do not overstuff the bag.

Overloading your tool bag will most likely cause significant stress on the zippers, above and beyond what they were designed for and will eventually cause the zipper(s) to separate.

If you have to strain to close your zipper, your tool bag is probably too full... Remove something, rearrange, or proceed with caution, always keeping in mind that you risk violating the terms of your warranty.

Learn more about the VETO PROPAC USA Tech MCT Blackout Tool bag AX3600 here