Hose Hauler AX3685 VETO PROPAC USA 

The HOSE HAULER is a versatile storage solution that is specifically designed with HVAC technicians and plumbers in mind. It can store vacuum pump hoses, micron gauges, valve core removers, adapters, a bottle of vacuum pump oil and basic hand tools needed for performing an evacuation on an HVAC system. The HOSE HAULER features a removable interior pouch and 2 removable storage dividers, allowing for customization of the interior storage layout. The bag also features a water/oil resistant interior for easy clean up.

Product Specifications :-

• Height (H): 17″ (43cm)
• Width (W): 17″ (43cm)
• Depth: 5″ (13cm)
• Weight (empty): 4 lbs/1.8kg
• Internal Volume: 3090 in3/50.5 L
• Max Payload: 15lbs/7kg

Maximized Tool Storage Capacity :-

• Up to 6 pockets
• Water/oil resistant tarpalon interior for easy clean up
• 2 exterior molle straps
• Removable interior pouch
• 2 Removable Dividers
• 2 Exterior D-Rings
• Rugged bottom to prevent tears and scratches
• YKK® zippers

VETO PRO PAC - TOOL BAGS PRODUCT CARE & MAINTENANCE

Keep your zippers clean and properly lubricated

Over time, dirt and grime will clog your zipper coils, preventing them from staying closed. To prevent this from happening, clean and lubricate your zippers twice a year (more often if you work on a dusty construction site).

To clean the coils: Scrub them with soapy water, using a toothbrush. After scrubbing the coils, blow them with air to remove any other fine hairs that were not removed with the brush. To lubricate the coils: Apply a silicone spray, beeswax, or zipper lubricant.

Protect zippers from sharp objects and excessive heat

Any sharp object or heat source can permanently damage zippers. Once a zipper coil is cut or snapped, the zipper will not work and in most cases cannot be repaired.

Most of the cut zipper coils we see are the result of sharp tools being stored inside the bag with the sharp side facing up. Be sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.

Do not overstuff the bag

Overloading your tool bag will most likely cause significant stress on the zippers, above and beyond what they were designed for and will eventually cause the zipper(s) to separate.

If you have to strain to close your zipper, your tool bag is probably too full... Remove something, rearrange, or proceed with caution, always keeping in mind that you risk violating the terms of your warranty.