"BELNET AEROSOL" 750ml INTERNAL CIRCUIT CLEANER ERRECOM

The "Belnet Aerosol," in a 750ml spray can, is a chemical cleaner for internal circuits, ideal for small piping networks, with high flushing pressure (8 bar / 116 psi) and a stable discharge pressure (3 bar / 44 psi) until empty. It is suitable for use prior to retrofit, after a compressor burnout, and during recovery or recycling processes in air conditioning and refrigeration systems.

The can is CO₂-pressurized and can be used directly (via the built-in cone) without the need for mechanical aids. Insert the BELNET Aerosol into an air conditioning or refrigeration system using the integrated cone so that it penetrates immediately and circulates until the liquid exits from the outlet. Flush with nitrogen to accelerate the evaporation of the product, and dispose of the used liquid in accordance with applicable regulations.

It is a flammable cleaning fluid specially designed to flush lines carrying freon, removing all dust, grease, and lubricant residues. Thanks to its very high evaporation capacity, it leaves no residue inside the system lines, making it especially suitable for retrofit jobs and for cleaning components and piping.

Before flushing, DISCONNECT the compressor, the thermostatic expansion valve, and the filter, as these components should not be flushed. For larger systems or automotive A/C units, flushing in sections is recommended.

BELNET should be used by experienced operators who have the appropriate equipment and personal protective gear. Keep away from flames and heat sources.

When applied on a cloth, left for a short time, and then rubbed and wiped with the same cloth, it can also remove adhesives.

Safety data sheet here 

See the Errecom catalogue here