TECH-Pac HI-VIZ ORANGE Backpack tool bag VETO PROPAC USA 

The Tech Pac Hi-Viz Orange is a stable, non-tipping back pack that holds tools and meters for technicians that need to climb ladders or walk long distances to access their work locations.

PRODUCT SPECIFICATIONS:

• Bag Height (BH): 19.5” (50cm)

• Handle Height (HH): 22" (56cm)

• Width (W): 13" (33cm)

• Depth (D): 10" (25cm)

• Weight (empty):  10 lbs (4.5kg)

• Internal Volume: 1550in³ (25L)

• Max Payload: 50lbs (23kg)

MAXIMIZED TOOL STORAGE CAPACITY:

• Vertical Tool Pockets: 46 interior and exterior tool pockets of various sizes

• 2 Storage Bays- 4 Storage Platforms

• Manifold Gauge and Hose Storage Pocket

• D-Rings: 4 large and 5 small

• Outside Mounted Stainless Steel Tape Clip Holder

• Pocket for a tablet or laptop is only 7" X 10"; fits a small laptop or most tablets

RUGGED MATERIALS & CONSTRUCTION:

• LOAD TESTED: PULLED TO DESTRUCTION AT 830 POUNDS (Handle failed); Hook failed at 200 Pounds

• Weatherproof Base: 3mm Injection Molded Polypropylene

• Weatherproof Body Fabric: 950 and 1250 PVC Impregnated Denier Nylon

• Weatherproof LIGHT GRAY Tool Pocket Fabric: 1800 PVC Impregnated Denier Nylon- LIGHT GRAY FOR BETTER VISIBILITY

• Quick Release Metal Hasp: Allows Easy Access to Rear Storage Bay and Creates Positive Shoulder

• Strap Load Connection

• Internally Stored Aluminum Hook to Hang Bag

• Over-Molded Ergonomic Grip

• Padded EVA Thermoformed, Ergonomic Back Padding

• Zippers: Double Stitched, Heavy Duty Plastic Coil Zippers with Oversized Zipper Tabs

• Metal Shoulder Strap Sliding Buckles

• D-Rings: Powder Coated Steel

• Rivets: Marine Grade Rivets

• Stitching: Industrial Strength Double Nylon Stitching

OTHER FEATURES:

• Adjustable Padded Shoulder Straps

• YKK Locking Zippers

• Magnetic Screw Catcher

• Tablet/All-Purpose Zippered Pocket

• Warranty: 5 Years (see Veto warranty terms and conditions)

VETO PRO PAC - TOOL BAGS PRODUCT CARE & MAINTENANCE

Keep your zippers clean and properly lubricated

Over time, dirt and grime will clog your zipper coils, preventing them from staying closed. To prevent this from happening, clean and lubricate your zippers twice a year (more often if you work on a dusty construction site).

To clean the coils: Scrub them with soapy water, using a toothbrush. After scrubbing the coils, blow them with air to remove any other fine hairs that were not removed with the brush. To lubricate the coils: Apply a silicone spray, beeswax, or zipper lubricant.

Protect zippers from sharp objects and excessive heat

Any sharp object or heat source can permanently damage zippers. Once a zipper coil is cut or snapped, the zipper will not work and in most cases cannot be repaired.

Most of the cut zipper coils we see are the result of sharp tools being stored inside the bag with the sharp side facing up. Be sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.

Do not overstuff the bag.

Overloading your tool bag will most likely cause significant stress on the zippers, above and beyond what they were designed for and will eventually cause the zipper(s) to separate.

If you have to strain to close your zipper, your tool bag is probably too full... Remove something, rearrange, or proceed with caution, always keeping in mind that you risk violating the terms of your warranty.

Learn more about the TECH-Pac HI-VIZ ORANGE Backpack tool bag VETO PROPAC USA here