TANK PUMP ΜΚ-4 WATER SENSOR, ASPEN

High quality condensate pump from the leading European manufacturer and one of the first worldwide. Unsurpassed quality, flexibility, functionality and reliability in components of high importance for devices!

The best quality pumps worldwide. Unsurpassed quality at the best price on the market. The only pump with full support so it never exposes you! 

The MK4 peristaltic pump works using water level sensors. This allows it to be on standby depending on the water level in the condensate tray. The detector has two sensors on the head, which are heated up to 15C above the ambient temperature. When the lower sensor comes into contact with the water due to the thermal conductivity of the sensor the temperature difference is detected and this activates the pump. When the water level drops below the height of the "nose" of the sensor, the pump continues to operate until the sensor is completely dry.

Suctions from 3m and discharges up to 6.5lt/hour at a height (manometric) up to 12m. It does not siphon or make noise if it needs to work dry. It can be installed in very limited places, it is made of plastic with a flame retardant. The water must not exceed 40°C.

It is recommended to check the pump head and change the tube every 12 months or sooner if necessary.