Curved Access Door (CAD) (Φ150) 250x150mm ,Z275 "ACRTOOLS"

Curved Access Door (CAD) (Φ150) 250x150mm ,Z275 "ACRTOOLS"

The curved access doors are used for inspection and maintenance of the circular ducts.

The material used to manufacture them is galvanized steel DX 51 D+Z275. There is a cellular sponge gasket to guarantee the airtight sealing and the color of the locking knob comes available in red & blue. The door sizes are as following: 180x80mm, 200x100mm, 250x150mm, 300x200mm, 400x300mm, 500x400mm, and 600x450mm.The flat access door is suitable for circular duct diameter from 80mm to 1250mm.

Installation of Flat Access Door

In order to install the flat access doors, you must first apply (stick) a self-adhesive template on a duct (a template is provided with each door). Second, the aperture has to be cut out (there is a tolerance of 3mm). Third, the doors are installed by unscrewing the hand knobs until a thread is levelled up with the top of the bolt. Using both hands, place the door in the hole at an angle, turn it straight and pull it out slightly to align. Then tighten the knobs.