VIBRATION ABSORBER 3/4" ACRTOOLS

VIBRATION ABSORBER 3/4" ACRTOOLS

The main function of a vibration eliminator is to absorb compressor vibration and stop its transition into the pipe work and components of refrigeration or air-conditioning system. By isolating the compressors vibration the risk of damage to pipe
work and the associated components is reduced.

Manufactured from a deep wave pitch corrugated stainless steel hose they are then enclosed in a tightly interwoven stainless steel braid for greater support and security. Both the hose and the braid are reinforced at each end by overlapping stainless steel ferrules with high temperature brazed solid copper connections.

Our Vibration eliminators are suitable for all fluorinated refrigerants and their associated oils dependent on operating pressures and in all lines of refrigeration and air-conditioning systems. When used is suction lines the entire vibration eliminator should be sealed with in an insulation layer.

Installation Considerations
•Vibration eliminators should be installed as clo se as possible to the compressor.
•Vibration eliminators are not designed to compensate for pipe work misalignment and should only be installed in straight lines.
•Vibration eliminators are not designed to absorb axial or torsional stress and should not be installed under compression or tension.
•Vibration eliminators should be installed perpendicular to the direction of vibration (inline with the compressor crankshaft).

Features

Designed for maximum flow and minimal pressure drop.
Solid copper connectors.
Stainless steel hose and braid
Stainless steel ferrules
Individuality tested, dehydrated and sealed.
Reduced chance of failure at the major stress point

Note; Vibration eliminators are not life time components. European standards require replacement every two years.