VETO PROPAC USA TP-LC Closable Compact Tool Pouch AX3599

The TP-LC is a one-sided, closable, compact-sized tool pouch that holds a variety of tools, meters, fasteners & wire nuts. The exterior pockets include a weather resistant rear storage area ideal for sensitive probes. The zippered cover of the TP-LC provides greater weather & dust protection for techs needing a compact bag for service calls requiring just the minimum amount of tools.

The TP-LC is great for technicians needing a compact tool storage bag for keeping a variety of service-oriented tools out of the weather and protected. Features include an injection molded base, rugged construction, “Hang-up” hook, heavy duty zippers, and over-sized over-molded carrying handle.

PRODUCT SPECIFICATIONS:

• Height (H): 12.5" (32cm)
• Width (W): 11" (28cm)
• Depth: 7" (18cm)
• Handle Height: 17.5in/44.5cm
• Weight (empty): 3.5 lbs/1.5kg
• Internal Volume: 290in3/5L
• Max Payload: 20lbs/9kg

MAXIMIZED TOOL STORAGE CAPACITY:

• 20 Internal pockets
• 14 External pockets
• 2 Metal tape clip holders
• "Hang-up" hook
• Tarpaulin covered rear pocket for added weather & abrasion protection
• Detachable over- olded elastomeric grip
• YKK® zippers
• Waterproof Polypropylene plastic base for moisture and abrasion protection

OTHER FEATURES:

• Warranty: 5 Years (see Veto warranty terms and conditions)

Additional Information

Weight 3.5 lbs

Dimensions 7 × 11 × 12.5 in

VETO PRO PAC - TOOL BAGS PRODUCT CARE & MAINTENANCE

Keep your zippers clean and properly lubricated

Over time, dirt and grime will clog your zipper coils, preventing them from staying closed. To prevent this from happening, clean and lubricate your zippers twice a year (more often if you work on a dusty construction site).

To clean the coils: Scrub them with soapy water, using a toothbrush. After scrubbing the coils, blow them with air to remove any other fine hairs that were not removed with the brush. To lubricate the coils: Apply a silicone spray, beeswax, or zipper lubricant.

Protect zippers from sharp objects and excessive heat

Any sharp object or heat source can permanently damage zippers. Once a zipper coil is cut or snapped, the zipper will not work and in most cases cannot be repaired.

Most of the cut zipper coils we see are the result of sharp tools being stored inside the bag with the sharp side facing up. Be sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.

Do not overstuff the bag.

Overloading your tool bag will most likely cause significant stress on the zippers, above and beyond what they were designed for and will eventually cause the zipper(s) to separate.

If you have to strain to close your zipper, your tool bag is probably too full... Remove something, rearrange, or proceed with caution, always keeping in mind that you risk violating the terms of your warranty.