TECH-Pac WHEELER backpack tool bag AX3560 VETO PROPAC USA 

The TECH PAC WHEELER is a rolling version of the best-selling TECH PAC backpack tool bag. Featuring additional volume capacity & Veto Pro Pac’s proprietary V-SWAP™ system that offers the back meter panel to be swapped out with optional laptop or bulk storage panels (both sold separately), the TECH PAC WHEELER provides a versatile tool transport system functioning as both a wheeled and backpack tool bag.

PRODUCT SPECIFICATIONS:

• Height (H): 21" (53cm)
• Width (W): 16" (41cm)
• Depth (D): 11" (28cm)
• Handle Height (HH): 24” (61cm)
• Weight (empty):  16 lbs/7.25 kg
• Internal Volume: 2000in3/33L
• Max Payload: 60lbs/28kg

MAXIMIZED TOOL STORAGE CAPACITY:

• Waterproof Polypropylene plastic base with integral wheels and trolley system
• Optional & stowable backpack shoulder harness
• Quick release metal hasp supports load & allows easy access to rear storage bay
• V-SWAP™ removable tool pocket panel system with alternate tool panels available & sold separately
• 48 interior and exterior tool pockets
• Exterior manifold gauge & hose storage pocket
• Thermoformed cushioned EVA back pad
• Metal YKK® locking zippers
• 8” Electrical tape strap
• Interior Gray pockets for better visibility
• Magnetic screw catcher
• 5 year Limited Warranty

OTHER FEATURES:

• Warranty: 5 Years (see Veto warranty terms and conditions)

VETO PRO PAC - TOOL BAGS PRODUCT CARE & MAINTENANCE

Keep your zippers clean and properly lubricated

Over time, dirt and grime will clog your zipper coils, preventing them from staying closed. To prevent this from happening, clean and lubricate your zippers twice a year (more often if you work on a dusty construction site).

To clean the coils: Scrub them with soapy water, using a toothbrush. After scrubbing the coils, blow them with air to remove any other fine hairs that were not removed with the brush. To lubricate the coils: Apply a silicone spray, beeswax, or zipper lubricant.

Protect zippers from sharp objects and excessive heat

Any sharp object or heat source can permanently damage zippers. Once a zipper coil is cut or snapped, the zipper will not work and in most cases cannot be repaired.

Most of the cut zipper coils we see are the result of sharp tools being stored inside the bag with the sharp side facing up. Be sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.

Do not overstuff the bag.

Overloading your tool bag will most likely cause significant stress on the zippers, above and beyond what they were designed for and will eventually cause the zipper(s) to separate.

If you have to strain to close your zipper, your tool bag is probably too full... Remove something, rearrange, or proceed with caution, always keeping in mind that you risk violating the terms of your warranty.

Learn more about the TECH-Pac WHEELER backpack tool bag AX3560 VETO PROPAC USA here