TECH PAC MCP INFRARED AX3703 VETO PROPAC USA 

The TECH PAC MCP INFRARED is a compact tool backpack in the new black and red color scheme. Identical in construction and storage capacity to the TECH PAC MC BLACKOUT – with the addition of side pockets for separate meter or tool storage. The bag also features external daisy chains for attaching pouches and accessories, as well as Velcro ideal for personalizing with morale patches. The TECH PAC MCP INFRARED also features our proprietary V-SWAP™ interchangeable panel system.

Specification

PRODUCT SPECIFICATIONS:

• Height (H): 16" (40.8cm)

• Width (W): 16.5" (48.3cm)

• Depth (D): 9" (23cm)

• Weight (empty):  10.5lbs/4.7kg

• Internal Volume: 1260in3/20.6L

• Max Payload: 40lbs/18kg

MAXIMIZED TOOL STORAGE CAPACITY:

• V-SWAP™ removable tool pocket panel system (panels available & sold separately)

• INFRARED color scheme

• External daisy chain for attaching pouches and accessories

• External Velcro loop for attaching patches

• 51 interior and exterior pockets

• 2 external side meter pockets

• Interior magnetic screw catcher

• Thermoformed cushioned EVA back pad

• High Impact Polypropylene plastic base

• Quick release metal hasp supports load & allows easy access to rear storage bay

• YKK® zippers

• 5 year limited warranty

Additional Information

VETO PRO PAC TOOL BAGS PRODUCT CARE AND MAINTENANCE

Keep the Zippers Clean & Lubricated

Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.

Protect the Zippers From Sharp Objects and/or Excessive Heat

Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.

Don’t Overstuff the Bag

Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!

View the technical brochure here