CHEMICAL Surface Protector CHEM-AQUA 11000 (5lt) NCH

Forms part of a 4-component set (Clean Bio Pack - 12.99.064, 12.99.068, 12.99.066 & 12.99.067) that cleans and disinfects internal closed water circuits, removing sludge, slime, algae, etc.

Areas of Application

• Open cooling systems with recirculation using acids for pH control

• Low hardness recirculating cooling systems (50 & 150 ppm)

• Open or closed loops for processing and deactivation systems

Instructions for Use

When used as a cleaner and deactivator, add 1 liter of Chem Aqua 11000 per 400 liters of system water, or 1 liter per 200 liters of water for a new system.
Circulate for at least 24 hours, drain the system, rinse thoroughly, and refill with fresh water.
If the system cannot be rinsed, allow it to bleed off while continuously refilling with fresh water until the system is clean.
Repeat if necessary.
For improved results, use in combination with other products from the BIO CLEAN PACK.

!! IMPORTANT:

• Do not store in systems containing sensitive metals such as tin & zinc.

• Do not use in drinking water systems or systems for potable water.

• Do not mix with biocides.

Technical Specifications

• Appearance: Transparent amber liquid

• Specific Gravity: 1.22 ± 0.01

• pH: 12.0 ± 0.5

• Solubility: Completely soluble