Condensate Atomization Pump P15J WIPCOOL

Turn waste into savings!

The P15J is designed for the evaporation and atomization of air conditioner condensates.

Compact in size, it consists of just a few components, minimizing the risk of malfunctions and failures.

A central unit (which integrates the pump and reservoir) is protected by a white casing. A condensate inlet hose collects water from the A/C unit, a small outlet tube disperses moisture in the form of mist, and a nozzle completes the system — requiring only basic connections to solve the drainage problem quickly, efficiently, and economically, while boosting system performance and reducing energy consumption.

It eliminates the annoying "dripping everywhere" issue, while dramatically improving heat exchange and, consequently, the overall efficiency of the air conditioning unit.

Designed primarily for A/C units with a cooling capacity under 30,000 BTU/hr, it fits easily anywhere, making it virtually invisible after installation.

Gravity-fed operation: The condensate water must flow into the reservoir by gravity.

Includes a built-in level gauge (spirit level) for horizontal installation, and features a dry contact alarm output to ensure long-term, trouble-free operation — and peace of mind in case intervention is needed.

• Power Supply: 100V–230V~ / 50–60Hz, 35 Watts

• Pressure: 7 bar

• Alarm Contact (dry): NC (Normally Closed)

• Maximum suction distance: 1.5 meters (5 ft) strictly (when the reservoir is installed separately from the P15J unit)

• Sensor tank capacity: 35 ml

• Maximum water handling capacity: ~15 liters/hour strictly (to avoid failures) → with 2 nozzles operating simultaneously

• Sound level at 1 meter: 55 dB(A)

• Maximum water temperature: 50°C

• Dimensions: 126 mm (H) x 75 mm (W) x 157 mm (L)

LED Indicators:

• Yellow: Power on

• Green: Processing water

• Red off: No water

• Alarm: Red + buzzer

View the tech manual here