"DANGER" AIR CONDITIONER BRACKET SUPPORT galvanized 1.5mm (set) ACRTOOLS

How many times have you found yourself faced with an air-conditioning installation in hard-to-reach places? – Where, in order to overcome the difficulty and install the outdoor unit, you have to expose yourself to incalculable danger, hanging the bracket outside a windowsill, literally over the edge? – Where you cannot, or simply cannot afford, to call a crane or cherry picker, and you decide to put yourself at risk in order to secure the bracket over the void?

All this and much more can be avoided without having to turn down the job, by using the "outdoor bracket support" for the air conditioner of your choice!!!

It is a very sturdy construction consisting of 2 interconnecting pieces, where a) on one of them you attach the arm of the bracket you are using (foldable or fixed) and then attach it to the outdoor unit of the air conditioner you are installing (safely from the floor – e.g. inside the living room), while b) the other piece of the "support bracket" is installed separately on the exterior wall much more easily, since you do not have to worry about its weight.

c) Then, with the A/C bracket already connected to its corresponding "support bracket" piece, you slide the air conditioner – together with its bracket – out through the window and simply slide it along the integrated guide of the "support bracket", while simultaneously securing it by inserting the special pin into the designated slot, connecting the two pieces of the "support bracket" together in less than one minute – easily, quickly and with complete safety!!!

Manufactured from reinforced 1.5mm thick galvanized sheet metal for durability, supporting a weight of up to 120 kg, while also being much more economical and offering a "PERFECT APPEARANCE".

• Maximum load: 120 kg
• Dimensions: clear HEIGHT = 45 cm (WALL CONTACT AREA (screw-to-screw) 37.5 cm) × 7.2 cm diameter

Extremely easy installation, making even the most dangerous installations seem like child's play!!!