Veto PROPAC USA SC45 Tool Pouch – AX3699 

The SC45 is a small, semi-rigid, multi-functional pouch designed to attach to a waist belt or the side of a tool bag using its wire belt clip or carabiner. This pouch combines a phone holster, Leatherman pouch, tool pouch, and EDC pouch into one. The front features a removable tool pouch with two main pockets for a screwdriver or pliers, a pair of thru-pockets, pencil pockets, a stainless steel tape measure clip, and an electrical tape strap. Inside, there is a padded wall with an elastic neoprene pocket to accommodate any size phone, along with an elastic band for storing a notepad. The pouch also includes a removable 3-pocket V-SWAP™ panel for storing a pocket knife, penlight, and pen or pencil.

Product Specifications :- 

• Height (H): 8.5″ / 21.5 cm
• Width (W):  5.5″ / 14 cm
• Depth:  4.5″/ 11.5 cm
• Weight (empty): 1.25 lbs/ 0.6 kg
• Internal Volume:  N/A
• Max Payload: 10lbs/ 4.5 kg

Maximized Tool Storage Capacity :-

• Semi-rigid exterior with moisture resistant back
• Removable tool pouch with 6 pockets, stainless tape measure clip, 2 D-rings, and magnetic flap for securing to a waist belt or trouser pocket
• Front external sleeve pocket for attaching removable tool pouch and sized for storing a smart phone
• Included Double-Gated Carabiner for hanging case while open or closed
• Wire-formed & nylon plastic belt clip
• V-SWAP™ removable tool pocket panel with 3 internal pockets designed to store a pocket knife, penlight, an pen or pencil
• Internal smart phone storage pocket with extra padding and anti-scratching material
• Internal elastic strap for storing a small notepad

• YKK® zippers

Other Features :-

• Warranty: 5 Years (see Veto warranty terms and conditions)

VETO PRO PAC - TOOL BAGS PRODUCT CARE & MAINTENANCE

Keep your zippers clean and properly lubricated

Over time, dirt and grime will clog your zipper coils, preventing them from staying closed. To prevent this from happening, clean and lubricate your zippers twice a year (more often if you work on a dusty construction site).

To clean the coils: Scrub them with soapy water, using a toothbrush. After scrubbing the coils, blow them with air to remove any other fine hairs that were not removed with the brush. To lubricate the coils: Apply a silicone spray, beeswax, or zipper lubricant.

Protect zippers from sharp objects and excessive heat

Any sharp object or heat source can permanently damage zippers. Once a zipper coil is cut or snapped, the zipper will not work and in most cases cannot be repaired.

Most of the cut zipper coils we see are the result of sharp tools being stored inside the bag with the sharp side facing up. Be sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.

Do not overstuff the bag.

Overloading your tool bag will most likely cause significant stress on the zippers, above and beyond what they were designed for and will eventually cause the zipper(s) to separate.

If you have to strain to close your zipper, your tool bag is probably too full... Remove something, rearrange, or proceed with caution, always keeping in mind that you risk violating the terms of your warranty.

See the technical datasheet here